Description
Automatic shearing device with data acquisition and processing system
According to NF P94-071-1, NF P94-071-2 / ASTM D3080 / AASHTO T236 / BS 1377: 7
Reference: S0280S
– Microprocessor controlled with digital readout during parameter testing
selected in the menu.
– Detection of shear values by cell and electronic sensors Adjustable speed without
discontinuity from 0.00001 to 15.0000 mm / min.
– Possibility to select different languages.
– The machine is equipped with 8 connectors for data acquisition and processing
– Firmware activating 3 connectors for basic data acquisition
Comes complete with:
– weight set of 50 Kg reducer system with lever arm ratio 10: 1 (eg: being able to
undergo pressure from 1 to 4 bars to the sample for 60 or 100 mm cells)
– 3 KN torque ring with electrical safety shut-off device, delivered with certificate
calibration (torque rings of different capacities up to 5000N available on
demand)
– Horizontal displacement sensor 25mm x 0.01mm
– 10mm vertical displacement sensor
Performance
Maximum shear load: 5000 N possible over the entire speed range.
– Shear speed: 0.00001 to 15.0000 mm / min, adjustable without discontinuity
– Display of speed and displacement with 0.00001 mm resolution.
– Full closed loop control motor
– Possibility of direct vertical load, or with a 10: 1 lever arm ratio
– Maximum vertical load: 500N; lever arm: 5500N
– Unlimited memory storage with: 2 USB ports, 1 SD card
Date of manufacture
2019
